• Security Car Barrier Gate Straight Arm For Parking Lot Entry And Exit Control Systems

Parameter:

1. Size of chassis : L340*W305*H1050mm
2. Voltage: AC110V/AC220V
3. Motor Wattage: 120W
4. Arm to ground: 0.85M
5. Arm opening time: 6s, 3s, 1s optional
6. Arm length: Straight arm length within 6m
7. Curved arm length within 4.5m
8. Two-fence arm length within 4.5m
9. Three-fence arm length within 4m
10. Working temperature: -20℃-+65℃
11. Chassis Color: Silver-black(other colors can be customized)

1. Advanced manual release, manually operate the arm quickly when power off, and automatic reset when power on.
2. Boom running smoothly with a motor transmission of cranks and shafts.
3. Remote control to operate the barrier gate.
4. Auto-reverse when the boom meets obstruction, and auto-stop mode is optional.
5. Infrared photocells interface is available. (need to install photocell device)2.6. Loop detector interface is available, to avoid hitting the car, and automatic boom falling down after car passing. (need to install loop detector)
6. Integrated RS485 communication interface, to control the boom up, down and stop by computer.
7. Interface for traffic light.
8. Integrated counter function, can store the times of opening signal, deduct thetimes when car passing the loop, boom falling down after car passing through, well improve the traffic efficiency.
9. Integrated with auto-closing function, coordinated with counter function, if the numbers of car passed less than the stored numbers, the boom will auto fall down by countdown, but will be new countdown if there is up signal or loop detector signal.

Application:

High-end communities
commercial buildings
government agencies
Airports
exhibition centers, etc.